Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who enjoys the fast cooking control of gas cooktops but wants an electric oven for baking? Discover a dual fuel range cooker that gives you the best of both worlds.
Gas cooktops are preferred by many home chefs with experience in the kitchen because of their superior temperature control. They also permit them to use advanced cooking techniques like charring. These powerhouse stoves can be costly though, especially when you need an additional gas connection and electrician to install it.
What is a 13amp outlet?
If you have a dual fuel range cooker (also known as a gas and electric oven) then you'll require a suitably rated 13 amp plug. The plug will also have to be wired hard into the cooker ring circuit by a fully certified electrician.
This ensures that the current flowing through the plug does not exceed the safe limit that could result in an electrical fire. best dual fuel range cookers uk is controlled by a fuse inside the plug. The fuse will blow when it is overloaded. This protects the appliance from overloads of electricity.
The fuse is rated at 13 amps, as indicated on the top of the plug. This is the maximum amount of current the plug could pass without damaging the appliance or heating the socket. When replacing fuses, it is crucial to use the same amperage rating that was used in the original. You risk overheating the socket if you replace a fuse that has a different rating.
A 13 amp fuse is likely to be a type of ceramic, which is very robust and able to withstand the high temperatures generated by the range cooker. Ceramic elements are also fire-resistant, and therefore a better choice than other types.
There are a variety of ways to install an 13 amp plug. It can be connected to an existing live socket, and the flex is then connected to it by an screw or a plastic jaw type cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Before connecting the wires, you may need to remove the wiring diagram printed on cardboard that is placed over the pins of some plugs. The wires must be trimmed to the right length, as when they are too long they can get crushed when plug covers are changed. The earth wire should be the longest wire to ensure it is connected before the neutral and line pins.
How do I install the 13amp plug?
The vast majority dual fuel range cookers in UK are equipped with a 13 amp plug. This is vital since ovens draw substantial current, while standard plug sockets only have a 10-amp rating.
In general, new appliances should be equipped with a plug at the point of sale. This is part of ensuring compliance with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug and this is the problem.
The first thing to consider when connecting a cooker with an existing plug socket is to ensure that the fuse rating in the fuse box matches the rating of the plug. This is vital because a faulty fuse could be dangerous.
It is also recommended to check that the fuse has been fully seated into the cartridge, and there is no excessive movement. The next step is to prepare the flex to be used. Remove the sheathing to expose the three insulated conductors. Then, cut the sheathing near the point of entry to the plug (beyond the cord grip) using a knife without penetrating the individual insulated conductors. This nick must be large enough to allow the cable and sheathing to separate when the sheathing is pulled back. Finally cut off the excess sheathing, leaving about 40mm over the flexing end.
The flex is placed over the plug with the earth terminal on the top and the live and neutral terminals on the bottom. Utilizing the colored conductors to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug has a screw type cord clamp, loosen this and then pull back the insulation to reveal the copper conductors. Connect each insulated conductor to the appropriate terminal (starting with the earth before neutral, and then the live) using the channel they run through the plug.
What is the maximum draw of a 13 amp plug?
The maximum power draw of an 13amp plug is 3kw at 230 volts. This is a significant amount of power, but the standard fuse that is fitted in the UK plugtop will not fail until the cable has heated to a risky temperature. It is essential to be aware of the amount of power you are using in your kitchen, as a defective plug or socket can cause a fire.
The fuse inside the plugtops are made of ceramic, around 25mm in length and rated for 240V mains. The fuses will have an BS Kitemark or similar mark on their side, and they'll contain sand. Glass or plastic alternatives are available, but should not be used in combination with a live plug.
In the UK, most dual fuel range cookers are wired. They are not able to be plugged directly into an outlet on the wall. They are usually connected via a dedicated cooker circuit, that is only suitable for appliances using up to 20 amps.
You can verify the ring circuit of your home by examining the fuse box or asking a local electrician. Ask them if the sockets are on the same ring, or if they are distinct. They will also be able to tell you if there is an individual circuit that powers your oven.
The size of your kitchen is one of the main factors when you're looking to buy a dual fuel range cooker. Luckily, we have a great selection of cookers to suit any space, including small 50-60cm dual fuel models, as well as massive 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
cheap dual fuel range cookers offer a wide selection of multi-function electric and gas cookers. These multifunction cookers let you cook a variety of meals like pasta, casseroles and curries.
Currys offers a broad selection of Cookers. Browse our online collection or visit us in store to view them. We offer free installation at home and delivery on a selection of range cookers, as well as flexible payments options. If you have any questions or concerns, our staff are ready to assist you - just drop us an email or give us a phone call. Credit is subject to status, and terms and condition apply.
What is the maximum current draw of a cooker switch?
There is a lot confusion about the maximum current draw for the cooker switch. The truth is that most cookers aren't made to connect to a standard socket, but rather are hard wired and fed into a dedicated oven ring circuit. This is because they will often draw more than 20 amps of power each time the electric oven and gas hob are used.
So, you won't find a dual fuel range cooker that could be connected to a standard socket, as this could create a dangerous fire hazard and is against electrical regulations. A professional electrician should always install new electrics in the kitchen, connecting them to the cooker. They will also ensure that the load of the oven and hob do not exceed the circuit's capacity.
The advantages of a dual fuel range cooker are the responsive heating of a gas cooktop and the precise operation of an electric oven. They are therefore a favorite among both chefs and home cooks. Dual cookers that use fuel are great to experiment with different cooking techniques, like searing or charcoaling.
When purchasing an appliance for your kitchen, you'll have to consider several factors like size, function and price. In addition, you will also need to make sure that your home is equipped with an appropriate gas hook-up to the appliance. If you're not sure then it's advisable to have an Gas Safe engineer inspect your property prior to installation.
Currys dual fuel range cookers come in a range of models to meet all budgets. From budget-friendly models from Indesit and Zanussi and our own Essentials collection. If you're seeking something more sophisticated We have a range of top JennAir models that feature many new features.
When you purchase a new dual fuel range cooker, it is important to check the owner's manual for specific information regarding the gas and electrical requirements. You will need an electric connection to your home. A plumber might be required to set it up for you. You might also require an individual cooker-ring circuit installed by an experienced electrical engineer.